Hanging Guide

Use this guide as a starting point and follow the product-specific instructions and hardware supplied with your piece. If you are uncertain about the wall, anchors, or weight, use a qualified installer.

1. Check the piece and hardware

Confirm the product dimensions, weight, mounting points, and supplied hardware before marking the wall. Do not assume the same mounting method applies to every design.

2. Choose the position

Measure the wall and nearby furniture, then mark the intended center and height with removable tape or a pencil. Use a level before drilling.

3. Identify the wall type

Drywall, masonry, concrete, and timber framing require different fixings. Select anchors and screws rated for the wall construction and for more than the full weight of the piece.

4. Install securely

Follow the anchor manufacturer's instructions. Use two people for large, heavy, or multi-panel artwork and keep the piece supported until every mounting point is secure.

5. Align multi-panel pieces

Mark a shared level line first, then position each panel using the spacing recommended on its product page. Recheck the full arrangement before drilling every point.

6. Final check and care

Confirm that the piece sits level and cannot lift away from its mounts. Dust with a dry cloth and avoid direct moisture or harsh cleaning products.

Safety note: Pride Living cannot assess your wall remotely. Use a professional installer whenever the wall type, fixing strength, wiring, plumbing, or product weight is uncertain.